News

Whether the European Black Widow has been a source of inspiration for the Boker Plus Karakurt remains the secret of Danish knifemaker Jesper Voxnaes. However, there are numerous indications that point to the black poisonous spider. The biting Clip point blade made of 154CM with stonewash finish acts from the ambush and snaps shut mercilessly immediately after pressing the push button. The high-quality stainless steel is convincing with a hardness of 58 to 59 HRC. Preferred 'prey' includes the diverse cutting tasks of everyday life, which the pocket knife easily 'catches' because of its irresistible features. The handle made of anodized 6061-T6 aluminum is ergonomically shaped and sits securely in the hand, even for difficult tasks. The wave-shaped serrations on the underside promise additional grip. The knife also irritates its 'prey' with a convertible clip (tip-up/l-r) and a practical lanyard hole. Developed in collaboration with the switchblade specialist Hogue, the Karakurt is made in the USA and impresses with perfect workmanship. It comes with a high-quality nylon case for storage.Blade Length: 3.07"Overall Length: 7.56"Blade Thickness: 0.12"Blade Material: 154CM Stainless SteelBlade Hardness: 58-59 HRCBlade Style: Clip PointBlade Finish: StonewashHandle Material: Black AluminumLocking Mechanism: ButtonDesigner: Jesper VoxnaesWeight: 3.35 oz.Made in the USA The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

On the heels of the explosively successful launch of the Claymore, Benchmade heard many enthusiastic requests for a plain-edge variant, and now they’re proud to present the 9070BK Claymore. This highly anticipated variation of an instant hit retains every crowd-pleasing feature, including the ultra-tough and laser-sharp CPM-D2 blade, robust ultralight construction, and namesake-appropriate detailing. This nonserrated push-button auto fires with authority, sure to energize casual-carry and hardcore users alike.Drop Point combo bladeCPM-D2 premium tool steel blade (60-62HRC)Cobalt Black finishPush Button Auto mechanismDeep-Carry Reversible Tip-Up pocket clipRanger Green Grivory handlesBlade Length: 3.60" (8.64 cm)Blade Thickness: 0.114" (2.896 mm)Handle Thickness: 0.60" (14.99 mm)Blade Material: CPM-D2 Tool SteelBlade Hardness: 60-62HRCBlade Style: Drop PointBlade Finish: Cobalt BlackWeight: 3.50 oz. (97.24 g)Pocket Clip: Deep Carry Tip-Up, Right/Left CarryHandle Material: Ranger Green GrivoryLock Mechanism: Push ButtonOverall Length: 8.60" (19.81 cm)Closed Length: 5.00" (12.70 cm)Class: BlackMade in the USA The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

Bringing a different look to a fan favorite, the 565-1 Mini Freek is a premium small frame folding knife that is dressed to impress. The carbon fiber handles maintain the comfy ergonomics that the Freek family is known for while trimming extraneous weight. Kitted out with a CPM-S90V blade, True Red barrel spacers and thumb studs, and excellent thumb ramp jimping, this knife is the perfect companion to its full-sized counterparts.AXIS LockA patented Benchmade exclusive, AXIS has been turning heads and winning fans ever since its introduction. A 100 percent ambidextrous design, AXIS gets its function from a small, hardened steel bar that rides forward and back in a slot machined into both steel liners. The bar extends to both sides of the knife, spans the liners and is positioned over the rear of the blade. It engages a ramped tang portion of the knife blade when it is opened. Two omega-style springs, one on each liner, give the locking bar its inertia to engage the knife tang. As a result, the tang is wedged solidly between a sizable stop pin and the AXIS bar itself.AXIS lock mechanismCPM-S90V stainless steel drop point blade (59-61HRC)Carbon fiber handlesTrue Red barrel spacers and thumb studsReversible tip-up pocket clipBlade Length: 3.00" (7.62 cm)Closed Length: 4.05" (10.29 cm)Overall Length: 7.04" (17.91 cm)Blade Material: CPM-S90V Stainless SteelBlade Thickness: 0.104" (2.64 mm)Blade Hardness: 59-61HRCBlade Style: Drop PointBlade Finish: SatinHandle Thickness: 0.545" (13.84 mm)Handle Material: Carbon FiberLocking Mechanism: AXIS LockPocket Clip: Split Arrow (Tip-Up, Right/Left Carry)Weight: 2.74 oz. (77.68 g)Designer: BenchmadeMade in the USA The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

Since its inception in 2001, the Griptilian has planted its flag as one of Benchmade's most popular platforms. This classic design has been updated with an entirely new look featuring red glass-filled nylon handles, black hardware, and two blade finish options created exclusively for KnifeCenter. The blade steel has also been upgraded on this model to CPM-20CV stainless steel. CPM-20CV is virtually identical in chemical composition to Benchmade's current M390 steel but is made in the US by Niagara as opposed to Bohler which is based Austria. It offers better edge retention but is not quite as tough to resharpen as M390.Ambidextrous Thumb-Stud OpenerLightweight GFN HandleDrop Point Blade ShapeMultiple Configurations AvailableCountry of Origin: USAAXIS A patented Benchmade exclusive, AXIS has been turning heads and winning fans ever since its introduction. A 100-percent ambidextrous design, AXIS gets its function from a small, hardened steel bar which rides forward and back in a slot machined into both steel liners. The bar extends to both sides of the knife, spanning the liners and positioned over the rear of the blade. It engages a ramped, tang portion of the knife blade when it is opened. Two omega-style springs, one on each liner, give the locking bar it's inertia to engage the knife tang, and as a result, the tang is wedged solidly between a sizable stop pin and the AXIS bar itself.Blade Length: 3.45" (8.76 cm)Blade Thickness: 0.115" (2.921 mm)Blade Material: CPM-20CV Stainless SteelBlade Hardness: 59-61HRCBlade Style: 551 Modified Drop-Point; Ambidextrous Thumb-StudsBlade Finish: Black CerakoteWeight: 3.88 oz. (110.00 g)Clip: Reversible, Tip-UpLock Mechanism: AXISOverall Length: 8.07" (20.50 cm)Closed Length: 4.62" (11.73 cm)Handle Thickness: 0.64" (16.26 mm)Class: BlueMade in the USA The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

Since its inception in 2001, the Griptilian has planted its flag as one of Benchmade's most popular platforms. This classic design has been updated with an entirely new look featuring red glass-filled nylon handles, black hardware, and two blade finish options created exclusively for KnifeCenter. The blade steel has also been upgraded on this model to CPM-20CV stainless steel. CPM-20CV is virtually identical in chemical composition to Benchmade's current M390 steel but is made in the US by Niagara as opposed to Bohler which is based Austria. It offers better edge retention but is not quite as tough to resharpen as M390.Ambidextrous Thumb-Stud OpenerLightweight GFN HandleDrop Point Blade ShapeMultiple Configurations AvailableCountry of Origin: USAAXIS A patented Benchmade exclusive, AXIS has been turning heads and winning fans ever since its introduction. A 100-percent ambidextrous design, AXIS gets its function from a small, hardened steel bar which rides forward and back in a slot machined into both steel liners. The bar extends to both sides of the knife, spanning the liners and positioned over the rear of the blade. It engages a ramped, tang portion of the knife blade when it is opened. Two omega-style springs, one on each liner, give the locking bar it's inertia to engage the knife tang, and as a result, the tang is wedged solidly between a sizable stop pin and the AXIS bar itself.Blade Length: 3.45" (8.76 cm)Blade Thickness: 0.115" (2.921 mm)Blade Material: CPM-20CV Stainless SteelBlade Hardness: 59-61HRCBlade Style: 551 Modified Drop-Point; Ambidextrous Thumb-StudsBlade Finish: Black CerakoteWeight: 3.88 oz. (110.00 g)Clip: Reversible, Tip-UpLock Mechanism: AXISOverall Length: 8.07" (20.50 cm)Closed Length: 4.62" (11.73 cm)Handle Thickness: 0.64" (16.26 mm)Class: BlueMade in the USA The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

The 4300-1 CLA (Composite Lite Auto) by Benchmade is an extremely lightweight automatic folder weighing in at only 3.47 oz. Depress the button and the blade fires into the open, locked position.The 4300-1 AUTO CLA features a 154CM stainless steel blade and milled black/green layered G10 handles. 154CM is an American-made premium grade stainless steel originally developed for tough industrial applications. Known for its best all-around qualities, it offers great corrosion resistance with good toughness and edge quality. The drop-point blade has a slow convex-curved drop in the point which characterizes a drop-point blade. This blade format lowers the point for control but adds strength to the tip. It is a very popular blade shape and is a great all-around blade format.Mechanism: Push-button automatic with safetyBlade Style: Drop-pointBlade Steel: 154CM stainless steel (58-61 HRC)Handle: Green and Black contoured G10Extra: Reversible tip-up deep-carry pocket clipBlade Length: 3.40" (8.64 cm)Blade Thickness: 0.114" (2.90 mm)Open: 7.85" (19.94 cm)Closed: 4.45" (11.30 cm)Weight: 3.47 oz. (98.37 g)Handle Thickness: 0.49" (12.45 mm)Made in USA The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

The standout Crooked River is now available in a smaller, everyday carry size. A wide blade with a slender handle and unique aesthetics are the hallmarks of this outdoor everyday carry tool. It features the same traditional profile, modern technology, and style that pushes the preconceived notions of what a hunting knife should be.AXIS lock mechanismCPM-S30V stainless steel clip point blade (58-60HRC)Anodized aluminum bolsters with contoured Dymondwood scales and stainless steel linersOrange G10 backspacer and anodized aluminum pivot ringReversible tip-up pocket clipBlade Length: 3.40"Closed Length: 4.50"Overall Length: 7.89"Blade Material: CPM-S30V Stainless SteelBlade Thickness: 0.114"Blade Hardness: 58-60HRCBlade Style: Clip PointBlade Finish: SatinHandle Thickness: 0.52"Handle Material: Contoured Dymondwood with Anodized Aluminum BolstersLocking Mechanism: AXIS LockPocket Clip: Deep-Carry Tip-Up, Right/LeftWeight: 3.29 oz.Designer: BenchmadeMade in the USA   The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

is world renowned as one of the strongest tactical folders in existence. Originally designed by Al Mar and Colonel Nick Rowe in the early 1980’s for the U.S. Army’s SERE school, today’s updated models are stronger, lighter and the most precise versions ever made. The SERE 2000 features pillar construction, flow through design and a top-mounted reversible Deep Pocket Clip for discrete carry. G10 handles provide plenty of traction with a flared front end ideal for combat grips and thrusting. Dual thumbstuds open the blade easily and a solid liner lock keeps it open. The VG10 drop point blade is useful for more than just combat with a flat grind for slicing efficiency and a deep swedge to aid in piercing, delivering the kind of performance you need in the real world.Since 1979, AL MAR Knives has been committed to making unique designs at quality levels that rival custom, hand-made knives. Today, each knife crafted by AL MAR is hand-finished and hand-sharpened by craftsmen dedicated to creating the very best possible product.Blade Length: 3.6"Overall Length: 8.5"Blade Thickness: 0.15"Steel: VG10 Stainless SteelHardness: Rc 59-60Action: Liner LockHandle Material: Olive Drab G10Clip: Ambidextrous Deep Pocket ClipWeight: 6 oz.Made in Japan The Kami’s pocket clip works as a backspacer too   The article is shared from Internet...knifeglobal：https ://knifeglobal.com

KB310G https://knifeglobal.com/products/kubey-kb310g-new-drake-lliner-lock-folding-knife-purple-g10-handle-3-4-sand-blast-stone-wash-m390?_pos=2&_sid=2c05fae3a&_ss=r Overall length: 200 mm (7.87 inches) Blade length: 88 mm (3.46 inches) Handle length: 112 mm (4.41 inches) Blade width: 31 mm (1.22 inches) Blade thickness: 3.1 mm (0.12 inch) Blade material: M390 Blade finish: Sand Blast Stone Wash Blade grind: flat Hardness: HRC60-61 Handle material: G10 Handle thickness: 13 mm (0.51 inch) Pivot cap: 6AL4V Central pivot: ceramic ball bearing Screw: 6AL4V Bottom bone: N/A Backapcer: 6AL4V titanium alloy Weight: 100 g Designer: Максим Ткачук (Ukraine) 

  KB235F https://knifeglobal.com/products/kubey-kb235f-nova-frame-lock-flipper-knife-titanium-handle-3-7-bead-blasted-14c28n?_pos=2&_sid=30ed9c674&_ss=r Overall Length:8.54" (217mm) Blade Length: 3.74" (95mm) Blade Thickness: (4mm) Blade Material: 14C28N Blade Hardness: HRC58-60 Blade Finish: Bead Blasted Handle Length: 4.72" (122mm) Handle Material: 6AL4V Titanium Pivot Material:6AL4V Titanium Clip-Material: 6AL4V Titanium Washers Material: Ceramic Ball Bearing Lock Type: Frame Lock Weight: 110.3g