Knife Steel Comparison: 10 Blade Materials at KnifeGlobal
For an easy-care everyday pocket knife, start with 14C28N. If you mostly cut dry cardboard on a budget, consider D2. If you cut often and want more time between sharpenings, look at M390, CPM 20CV or S90V. This guide compares the ten blade-material categories in KnifeGlobal’s shop menu so you can shortlist a knife without sorting through a metallurgy chart.
Knife steel comparison chart
| Blade material | When to choose it | What to know | Explore |
|---|---|---|---|
| 14C28N | Low-maintenance everyday use | Good corrosion resistance and straightforward touch-ups. Choose this first if you’re unsure. | KUBEY Pebble KU481D |
| D2 | Budget folders for dry utility work | Good wear resistance for the price. Wipe dry promptly after wet use. | KUBEY Rook KU508A |
| AUS-10 | Stainless everyday use | A practical stainless option if you like the model’s size, handle and price. | Browse AUS-10 |
| CPM S35VN | Balanced premium stainless | A middle ground when you want edge life, corrosion resistance and reasonable sharpening effort. | Browse S35VN |
| Elmax | Premium stainless with wear resistance | Consider it for regular slicing when you also value corrosion resistance. | Browse Elmax |
| M390 | Edge life and corrosion resistance | A good premium choice for frequent slicing. Expect more sharpening effort than with 14C28N. | KB Momentum KB386A |
| CPM 20CV | A similar buying priority to M390 | Choose between the two based on the actual knife’s grind, handle and price. | Browse CPM 20CV |
| CPM S90V | Long edge life for repeated slicing | Very wear resistant. Diamond abrasives are useful when a full sharpening is needed. | KUBEY Small Pioneer KB482A |
| Vanax | Humid or wet conditions | A premium corrosion-resistant choice. Dry the knife after use, including the pivot and hardware. | Browse Vanax |
| Damascus | Visual pattern and finish | Check the core steel or listed alloy. Edge behavior and care depend on the construction. | Browse Damascus |
14C28N vs. D2: which should you buy first?
Choose 14C28N if you work around moisture or want an edge that is easy to touch up. The KUBEY Pebble KU481D is a practical starting point. Choose the KUBEY Rook KU508A in D2 if you’re keeping to a tighter budget and mostly cutting dry materials. See our D2 folding knife guide for more examples.

M390 vs. CPM 20CV vs. S90V: where to spend more
Start with M390 or CPM 20CV if you want a premium stainless blade for regular slicing. Compare the whole knife, including blade thickness and handle comfort. Consider S90V if you mainly want wear resistance for repetitive slicing and have the right sharpening abrasive. The KB Momentum KB386A and KUBEY Small Pioneer KB482A give you two titanium-handled options with different blade sizes and steel priorities.

Vanax, Damascus and titanium: what the label tells you
Vanax makes sense when corrosion resistance is your first priority. With Damascus, look at the listed core steel or alloy before deciding how to care for it. Titanium on the Momentum and Small Pioneer describes the handle. For a titanium-handled knife, read the blade steel and handle material as separate specs.
Heat treatment, blade grind and edge geometry also affect how a knife cuts and holds an edge. For source specifications, see Alleima on 14C28N, BÖHLER on M390, Uddeholm on Vanax and Uddeholm on Elmax.
Browse KnifeGlobal folding knives and check the exact blade steel on the product page before choosing a variant.